Batteries & Charging

Nominal voltage

What does Nominal voltage mean?

The rated average voltage of a battery across a discharge, used to name it: a 48 V e-bike pack is 13 cells at 3.6 V each, and reads about 54.6 V when full.

Nominal voltage is the rated average voltage of a battery over a full discharge, and it is the number in the battery’s name. A 48 V e-bike pack is 13 lithium-ion cells in series, each rated 3.6 V nominal in Panasonic’s NCR18650B datasheet: 13 × 3.6 V = 46.8 V, rounded to 48 V on the label.

Is nominal voltage the same as full voltage?

Nominal voltage is not the voltage you read on a full battery. The same datasheet charges each cell to 4.20 V and stops discharge at 2.50 V, so a 48 V pack reads about 54.6 V off the charger and 32.5 V at its floor, our calculation. A meter that shows 48 V on a “48 V” battery is showing a pack about halfway down, not a full one.

The difference matters when you buy a charger or diagnose a dead bike. A charger must match the pack’s full voltage: Ride1Up says its 48 V bikes use a 54 V charger and its 36 V bikes a 42 V one. Our e-bike battery voltage chart gives the full, nominal and floor voltages for 36, 48 and 52 V packs. Related: charger output rating and state of charge.

Also known as: nominal voltages

Related terms

Where we explain it in depth

Riding Nexus

Ask an AI about this term

Open this definition in your assistant and ask how it applies to the bike you ride or want to buy.

Opens in a new tab. This page stays open here.